AMAL PUMP LLP

V5 Noryl Virgin Series Submersible Pump Set

The V5 Noryl Virgin Series Submersible Pump Set is a versatile pump designed for various applications including domestic, commercial and industrial settings. It can be used with single phase or three phase power and operates on a range of voltages and frequencies. The pump is made from high-quality materials including stainless steel (AISI 410 and 202) for the motor shaft, body pipe, casting parts, and thrust bearing. The pump bowl and impeller are constructed from GF30, and the suction and NRV are made from CI FG:200. The V5 Noryl Virgin Series Submersible Pump Set is designed for continuous duty (S1) and offers a wide range of performance specifications.

Let's Communicate

Fundamental Of Product

Specifications

Power Range	3 HP to 5 HP SINGLE PHASE, 3 HP to 10 HP THREE PHASE
Speed	2800 RPM
Version	Single Phase 180 V to 230 V, 50 Hz, AC Supply, Three Phase 360 V to 415 V, 50 Hz, AC Supply
Maximum Head	10 Mtrs To 350 Mtrs
Maximum Flow Rate	330 LPM to 35 LPM
Degree Protection	IP58
Max Outer Diameter in mm	Suitable for 5" bore
Direction of Rotation	Counter Clockwise from Driving end - 1 ph, Electrically Reversible - 3ph
Type of Duty	S1 (Continues)
Method of Starting	1 Ph - Capacitor Start, 3 Ph - Direct Online
Maximum Starts per hour	11 times

Construction Material

Motor		Pump
Motor Shaft	SS AISI 410	Bowl & Impeller	GF30
Body Pipe	SS AISI 202	Suction & NRV	CI FG: 200
Casting Part	CI FG: 200	Pump Shaft	SS AISI 410
Thrust Bearing	Carbon & SS	Pump Casting	SS AISI 202
Motor Bush	LTB-4	All Hardware	Stainless Steel
Stamping	CRCA Electric Grade	Pump Bush	NBR / LTB4
Copper	EC grade 99.9% copper	Pump Sleeve	SS-410
Winding Wire	Multilayer Polister Insulated	Pump Couple	SS-410
Oil Seal	NBR

Application	Pump Liquids
Domestic & municipal water supply	Clean, Thin, Non-Aggressive, Non-Explosive
Solar Applpication	Clear cold, Fresh Water Without solid partical
Sprinkler Syatem	or Abrasives
Fountains, Gardens

Features & Advantages

Shaft Support

Considering the use of an iron casting middle and trees and shrubs, higher than average stage of cultivation pumps put forward extra intermediary support. When a pump has greater stages, this aids in giving the shaft and impeller more support.

Self Align

The pump uses a self-aligning spline coupling to connect the motor to the pump shaft. This type of coupling can accommodate slight misalignments between the motor and shaft, which helps to prevent damage to the pump.

Smooth Run

The pump's associated with the components are on an ongoing basis transformed in order to decrease vibration-based and noise in addition to noise This is responsible for a pump that operates with greater efficiency and without speaking.

Consistent Quality

The pump parts are machined on CNC (computer numerically controlled) machines, which ensures that they are all manufactured to the same precise specifications. This helps to ensure consistent quality performance from one pump to another.