AMAL PUMP LLP

V4 Standard Mix Flow Series Submersible Pump Set

The V4 Standard Mix Flow Series Submersible Pump Set is a versatile pump that can be used in a variety of applications. It is designed for use in wells, with a maximum diameter of 4 inches, and can be used for domestic and municipal water supply, solar applications, and sprinkler systems. The pump is made of stainless steel and has a NEMA-standard ingress protection rating of IP58, which means that it is dust tight and can withstand being submerged in water for long periods of time. The V4 Standard Mix Flow Series Submersible Pump Set comes in single phase and three phase options. The single phase version operates on 180 to 230 volts and 50 Hz, while the three phase version operates on 360 to 415 volts and 50 Hz.

Let's Communicate

Fundamental Of Product

Specifications

Power Range	0.5 HP to 3 HP SINGLE PHASE, 1 HP to 7.5 HP THREE PHASE
Speed	2800 RPM
Version	Single Phase 180 V to 230 V, 50 Hz, AC Supply, Three Phase 360 V to 415 V, 50 Hz, AC Supply
Maximum Head	3 Mtrs To 360 Mtrs
Maximum Flow Rate	350 LPM to 15 LPM
Degree Protection	IP58
Max Outer Diameter in mm	Suitable for 4" bore
Direction of Rotation	Counter Clockwise from Driving end - 1 ph, Electrically Reversible - 3ph
Type of Duty	S1 (Continues)
Method of Starting	1 Ph - Capacitor Start, 3 Ph - Direct Online
Maximum Starts per hour	11 times

Construction Material

Motor		Pump
Motor Shaft	SS AISI 410	Bowl & Impeller	GF30
Body Pipe	SS AISI 202	Suction & NRV	CI FG: 200
Casting Part	CI FG: 200	Pump Shaft	SS AISI 410
Thrust Bearing	Carbon & SS	Pump Casting	SS AISI 202
Motor Bush	LTB-4	All Hardware	Stainless Steel
Stamping	CRCA Electric Grade	Pump Bush	NBR / LTB4
Copper	EC grade 99.9% copper	Pump Sleeve	SS-410
Winding Wire	Multilayer Polister Insulated	Pump Couple	SS-410
Oil Seal	NBR

Application	Pump Liquids
Domestic & municipal water supply	Clean, Thin, Non-Aggressive, Non-Explosive
Solar Applpication	Clear cold, Fresh Water Without solid partical
Sprinkler Syatem	or Abrasives
Fountains, Gardens

Features & Advantages

CNC Machined

Every of the pump's the components are cut to exact requirements thanks to CNC machining, a programmed by computers manufacturing facilities technique. This contributes to ensuring the pump operates dependably and effectively.

HDPE / UPVC Pipes

The two commonly used kinds of highly resistant to corrosion polyethylene pipes are HDPE and UPVC. individuals are exceptional for being used alongside submersible pumps that are submerged as a consequence of this are concerned.

Arrangement

The most appropriate proper alignment of the pump's as well as the motor's shafts that are has been established by the aforementioned type regarding relationship between components. This lessens the probabilities that the pump could become damaged.

Durability

A particular variety associated with coating composed of epoxy that has been shown to be extraordinarily resistant to the deterioration has the designation CED coating to be applied. This makes certain a longer lifespan for the pump and helps shield it from the weather.